diff options
Diffstat (limited to 'src/Ryujinx.Graphics.OpenGL/Effects/Shaders/fxaa.glsl')
| -rw-r--r-- | src/Ryujinx.Graphics.OpenGL/Effects/Shaders/fxaa.glsl | 1174 |
1 files changed, 1174 insertions, 0 deletions
diff --git a/src/Ryujinx.Graphics.OpenGL/Effects/Shaders/fxaa.glsl b/src/Ryujinx.Graphics.OpenGL/Effects/Shaders/fxaa.glsl new file mode 100644 index 00000000..8bdcbca6 --- /dev/null +++ b/src/Ryujinx.Graphics.OpenGL/Effects/Shaders/fxaa.glsl @@ -0,0 +1,1174 @@ +/*============================================================================ + + + NVIDIA FXAA 3.11 by TIMOTHY LOTTES + + +------------------------------------------------------------------------------ +COPYRIGHT (C) 2010, 2011 NVIDIA CORPORATION. ALL RIGHTS RESERVED. +------------------------------------------------------------------------------ +TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS SOFTWARE IS PROVIDED +*AS IS* AND NVIDIA AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES, EITHER EXPRESS +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL NVIDIA +OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR +CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR +LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, +OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE +THIS SOFTWARE, EVEN IF NVIDIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + +------------------------------------------------------------------------------ + INTEGRATION CHECKLIST +------------------------------------------------------------------------------ +(1.) +In the shader source, setup defines for the desired configuration. +When providing multiple shaders (for different presets), +simply setup the defines differently in multiple files. +Example, + + #define FXAA_PC 1 + #define FXAA_HLSL_5 1 + #define FXAA_QUALITY__PRESET 12 + +Or, + + #define FXAA_360 1 + +Or, + + #define FXAA_PS3 1 + +Etc. + +(2.) +Then include this file, + + #include "Fxaa3_11.h" + +(3.) +Then call the FXAA pixel shader from within your desired shader. +Look at the FXAA Quality FxaaPixelShader() for docs on inputs. +As for FXAA 3.11 all inputs for all shaders are the same +to enable easy porting between platforms. + + return FxaaPixelShader(...); + +(4.) +Insure pass prior to FXAA outputs RGBL (see next section). +Or use, + + #define FXAA_GREEN_AS_LUMA 1 + +(5.) +Setup engine to provide the following constants +which are used in the FxaaPixelShader() inputs, + + FxaaFloat2 fxaaQualityRcpFrame, + FxaaFloat4 fxaaConsoleRcpFrameOpt, + FxaaFloat4 fxaaConsoleRcpFrameOpt2, + FxaaFloat4 fxaaConsole360RcpFrameOpt2, + FxaaFloat fxaaQualitySubpix, + FxaaFloat fxaaQualityEdgeThreshold, + FxaaFloat fxaaQualityEdgeThresholdMin, + FxaaFloat fxaaConsoleEdgeSharpness, + FxaaFloat fxaaConsoleEdgeThreshold, + FxaaFloat fxaaConsoleEdgeThresholdMin, + FxaaFloat4 fxaaConsole360ConstDir + +Look at the FXAA Quality FxaaPixelShader() for docs on inputs. + +(6.) +Have FXAA vertex shader run as a full screen triangle, +and output "pos" and "fxaaConsolePosPos" +such that inputs in the pixel shader provide, + + // {xy} = center of pixel + FxaaFloat2 pos, + + // {xy__} = upper left of pixel + // {__zw} = lower right of pixel + FxaaFloat4 fxaaConsolePosPos, + +(7.) +Insure the texture sampler(s) used by FXAA are set to bilinear filtering. + + +------------------------------------------------------------------------------ + INTEGRATION - RGBL AND COLORSPACE +------------------------------------------------------------------------------ +FXAA3 requires RGBL as input unless the following is set, + + #define FXAA_GREEN_AS_LUMA 1 + +In which case the engine uses green in place of luma, +and requires RGB input is in a non-linear colorspace. + +RGB should be LDR (low dynamic range). +Specifically do FXAA after tonemapping. + +RGB data as returned by a texture fetch can be non-linear, +or linear when FXAA_GREEN_AS_LUMA is not set. +Note an "sRGB format" texture counts as linear, +because the result of a texture fetch is linear data. +Regular "RGBA8" textures in the sRGB colorspace are non-linear. + +If FXAA_GREEN_AS_LUMA is not set, +luma must be stored in the alpha channel prior to running FXAA. +This luma should be in a perceptual space (could be gamma 2.0). +Example pass before FXAA where output is gamma 2.0 encoded, + + color.rgb = ToneMap(color.rgb); // linear color output + color.rgb = sqrt(color.rgb); // gamma 2.0 color output + return color; + +To use FXAA, + + color.rgb = ToneMap(color.rgb); // linear color output + color.rgb = sqrt(color.rgb); // gamma 2.0 color output + color.a = dot(color.rgb, FxaaFloat3(0.299, 0.587, 0.114)); // compute luma + return color; + +Another example where output is linear encoded, +say for instance writing to an sRGB formated render target, +where the render target does the conversion back to sRGB after blending, + + color.rgb = ToneMap(color.rgb); // linear color output + return color; + +To use FXAA, + + color.rgb = ToneMap(color.rgb); // linear color output + color.a = sqrt(dot(color.rgb, FxaaFloat3(0.299, 0.587, 0.114))); // compute luma + return color; + +Getting luma correct is required for the algorithm to work correctly. + + +------------------------------------------------------------------------------ + BEING LINEARLY CORRECT? +------------------------------------------------------------------------------ +Applying FXAA to a framebuffer with linear RGB color will look worse. +This is very counter intuitive, but happends to be true in this case. +The reason is because dithering artifacts will be more visiable +in a linear colorspace. + + +------------------------------------------------------------------------------ + COMPLEX INTEGRATION +------------------------------------------------------------------------------ +Q. What if the engine is blending into RGB before wanting to run FXAA? + +A. In the last opaque pass prior to FXAA, + have the pass write out luma into alpha. + Then blend into RGB only. + FXAA should be able to run ok + assuming the blending pass did not any add aliasing. + This should be the common case for particles and common blending passes. + +A. Or use FXAA_GREEN_AS_LUMA. + +============================================================================*/ + +#version 430 core + +layout(local_size_x = 16, local_size_y = 16) in; +layout(rgba8, binding = 0) uniform image2D imgOutput; + +uniform sampler2D inputTexture; +layout(location=0) uniform vec2 invResolution; + +#define FXAA_QUALITY__PRESET 12 +#define FXAA_GREEN_AS_LUMA 1 +#define FXAA_PC 1 +#define FXAA_GLSL_130 1 + + +/*============================================================================ + + INTEGRATION KNOBS + +/*==========================================================================*/ +#ifndef FXAA_PC + // + // FXAA Quality + // The high quality PC algorithm. + // + #define FXAA_PC 0 +#endif +/*--------------------------------------------------------------------------*/ +#ifndef FXAA_GLSL_120 + #define FXAA_GLSL_120 0 +#endif +/*--------------------------------------------------------------------------*/ +#ifndef FXAA_GLSL_130 + #define FXAA_GLSL_130 0 +#endif +/*==========================================================================*/ +#ifndef FXAA_GREEN_AS_LUMA + // + // For those using non-linear color, + // and either not able to get luma in alpha, or not wanting to, + // this enables FXAA to run using green as a proxy for luma. + // So with this enabled, no need to pack luma in alpha. + // + // This will turn off AA on anything which lacks some amount of green. + // Pure red and blue or combination of only R and B, will get no AA. + // + // Might want to lower the settings for both, + // fxaaConsoleEdgeThresholdMin + // fxaaQualityEdgeThresholdMin + // In order to insure AA does not get turned off on colors + // which contain a minor amount of green. + // + // 1 = On. + // 0 = Off. + // + #define FXAA_GREEN_AS_LUMA 0 +#endif +/*--------------------------------------------------------------------------*/ +#ifndef FXAA_EARLY_EXIT + // + // Controls algorithm's early exit path. + // On PS3 turning this ON adds 2 cycles to the shader. + // On 360 turning this OFF adds 10ths of a millisecond to the shader. + // Turning this off on console will result in a more blurry image. + // So this defaults to on. + // + // 1 = On. + // 0 = Off. + // + #define FXAA_EARLY_EXIT 1 +#endif +/*--------------------------------------------------------------------------*/ +#ifndef FXAA_DISCARD + // + // Only valid for PC OpenGL currently. + // Probably will not work when FXAA_GREEN_AS_LUMA = 1. + // + // 1 = Use discard on pixels which don't need AA. + // For APIs which enable concurrent TEX+ROP from same surface. + // 0 = Return unchanged color on pixels which don't need AA. + // + #define FXAA_DISCARD 0 +#endif +/*--------------------------------------------------------------------------*/ +#ifndef FXAA_FAST_PIXEL_OFFSET + // + // Used for GLSL 120 only. + // + // 1 = GL API supports fast pixel offsets + // 0 = do not use fast pixel offsets + // + #ifdef GL_EXT_gpu_shader4 + #define FXAA_FAST_PIXEL_OFFSET 1 + #endif + #ifdef GL_NV_gpu_shader5 + #define FXAA_FAST_PIXEL_OFFSET 1 + #endif + #ifdef GL_ARB_gpu_shader5 + #define FXAA_FAST_PIXEL_OFFSET 1 + #endif + #ifndef FXAA_FAST_PIXEL_OFFSET + #define FXAA_FAST_PIXEL_OFFSET 0 + #endif +#endif +/*--------------------------------------------------------------------------*/ +#ifndef FXAA_GATHER4_ALPHA + // + // 1 = API supports gather4 on alpha channel. + // 0 = API does not support gather4 on alpha channel. + // + #if (FXAA_HLSL_5 == 1) + #define FXAA_GATHER4_ALPHA 1 + #endif + #ifdef GL_ARB_gpu_shader5 + #define FXAA_GATHER4_ALPHA 1 + #endif + #ifdef GL_NV_gpu_shader5 + #define FXAA_GATHER4_ALPHA 1 + #endif + #ifndef FXAA_GATHER4_ALPHA + #define FXAA_GATHER4_ALPHA 0 + #endif +#endif + +/*============================================================================ + FXAA QUALITY - TUNING KNOBS +------------------------------------------------------------------------------ +NOTE the other tuning knobs are now in the shader function inputs! +============================================================================*/ +#ifndef FXAA_QUALITY__PRESET + // + // Choose the quality preset. + // This needs to be compiled into the shader as it effects code. + // Best option to include multiple presets is to + // in each shader define the preset, then include this file. + // + // OPTIONS + // ----------------------------------------------------------------------- + // 10 to 15 - default medium dither (10=fastest, 15=highest quality) + // 20 to 29 - less dither, more expensive (20=fastest, 29=highest quality) + // 39 - no dither, very expensive + // + // NOTES + // ----------------------------------------------------------------------- + // 12 = slightly faster then FXAA 3.9 and higher edge quality (default) + // 13 = about same speed as FXAA 3.9 and better than 12 + // 23 = closest to FXAA 3.9 visually and performance wise + // _ = the lowest digit is directly related to performance + // _ = the highest digit is directly related to style + // + #define FXAA_QUALITY__PRESET 12 +#endif + + +/*============================================================================ + + FXAA QUALITY - PRESETS + +============================================================================*/ + +/*============================================================================ + FXAA QUALITY - MEDIUM DITHER PRESETS +============================================================================*/ +#if (FXAA_QUALITY__PRESET == 10) + #define FXAA_QUALITY__PS 3 + #define FXAA_QUALITY__P0 1.5 + #define FXAA_QUALITY__P1 3.0 + #define FXAA_QUALITY__P2 12.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 11) + #define FXAA_QUALITY__PS 4 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 3.0 + #define FXAA_QUALITY__P3 12.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 12) + #define FXAA_QUALITY__PS 5 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 4.0 + #define FXAA_QUALITY__P4 12.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 13) + #define FXAA_QUALITY__PS 6 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 4.0 + #define FXAA_QUALITY__P5 12.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 14) + #define FXAA_QUALITY__PS 7 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 4.0 + #define FXAA_QUALITY__P6 12.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 15) + #define FXAA_QUALITY__PS 8 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 2.0 + #define FXAA_QUALITY__P6 4.0 + #define FXAA_QUALITY__P7 12.0 +#endif + +/*============================================================================ + FXAA QUALITY - LOW DITHER PRESETS +============================================================================*/ +#if (FXAA_QUALITY__PRESET == 20) + #define FXAA_QUALITY__PS 3 + #define FXAA_QUALITY__P0 1.5 + #define FXAA_QUALITY__P1 2.0 + #define FXAA_QUALITY__P2 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 21) + #define FXAA_QUALITY__PS 4 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 22) + #define FXAA_QUALITY__PS 5 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 23) + #define FXAA_QUALITY__PS 6 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 24) + #define FXAA_QUALITY__PS 7 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 3.0 + #define FXAA_QUALITY__P6 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 25) + #define FXAA_QUALITY__PS 8 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 2.0 + #define FXAA_QUALITY__P6 4.0 + #define FXAA_QUALITY__P7 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 26) + #define FXAA_QUALITY__PS 9 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 2.0 + #define FXAA_QUALITY__P6 2.0 + #define FXAA_QUALITY__P7 4.0 + #define FXAA_QUALITY__P8 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 27) + #define FXAA_QUALITY__PS 10 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 2.0 + #define FXAA_QUALITY__P6 2.0 + #define FXAA_QUALITY__P7 2.0 + #define FXAA_QUALITY__P8 4.0 + #define FXAA_QUALITY__P9 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 28) + #define FXAA_QUALITY__PS 11 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 2.0 + #define FXAA_QUALITY__P6 2.0 + #define FXAA_QUALITY__P7 2.0 + #define FXAA_QUALITY__P8 2.0 + #define FXAA_QUALITY__P9 4.0 + #define FXAA_QUALITY__P10 8.0 +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_QUALITY__PRESET == 29) + #define FXAA_QUALITY__PS 12 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.5 + #define FXAA_QUALITY__P2 2.0 + #define FXAA_QUALITY__P3 2.0 + #define FXAA_QUALITY__P4 2.0 + #define FXAA_QUALITY__P5 2.0 + #define FXAA_QUALITY__P6 2.0 + #define FXAA_QUALITY__P7 2.0 + #define FXAA_QUALITY__P8 2.0 + #define FXAA_QUALITY__P9 2.0 + #define FXAA_QUALITY__P10 4.0 + #define FXAA_QUALITY__P11 8.0 +#endif + +/*============================================================================ + FXAA QUALITY - EXTREME QUALITY +============================================================================*/ +#if (FXAA_QUALITY__PRESET == 39) + #define FXAA_QUALITY__PS 12 + #define FXAA_QUALITY__P0 1.0 + #define FXAA_QUALITY__P1 1.0 + #define FXAA_QUALITY__P2 1.0 + #define FXAA_QUALITY__P3 1.0 + #define FXAA_QUALITY__P4 1.0 + #define FXAA_QUALITY__P5 1.5 + #define FXAA_QUALITY__P6 2.0 + #define FXAA_QUALITY__P7 2.0 + #define FXAA_QUALITY__P8 2.0 + #define FXAA_QUALITY__P9 2.0 + #define FXAA_QUALITY__P10 4.0 + #define FXAA_QUALITY__P11 8.0 +#endif + + + +/*============================================================================ + + API PORTING + +============================================================================*/ +#if (FXAA_GLSL_120 == 1) || (FXAA_GLSL_130 == 1) + #define FxaaBool bool + #define FxaaDiscard discard + #define FxaaFloat float + #define FxaaFloat2 vec2 + #define FxaaFloat3 vec3 + #define FxaaFloat4 vec4 + #define FxaaHalf float + #define FxaaHalf2 vec2 + #define FxaaHalf3 vec3 + #define FxaaHalf4 vec4 + #define FxaaInt2 ivec2 + #define FxaaSat(x) clamp(x, 0.0, 1.0) + #define FxaaTex sampler2D +#else + #define FxaaBool bool + #define FxaaDiscard clip(-1) + #define FxaaFloat float + #define FxaaFloat2 float2 + #define FxaaFloat3 float3 + #define FxaaFloat4 float4 + #define FxaaHalf half + #define FxaaHalf2 half2 + #define FxaaHalf3 half3 + #define FxaaHalf4 half4 + #define FxaaSat(x) saturate(x) +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_GLSL_120 == 1) + // Requires, + // #version 120 + // And at least, + // #extension GL_EXT_gpu_shader4 : enable + // (or set FXAA_FAST_PIXEL_OFFSET 1 to work like DX9) + #define FxaaTexTop(t, p) texture2DLod(t, p, 0.0) + #if (FXAA_FAST_PIXEL_OFFSET == 1) + #define FxaaTexOff(t, p, o, r) texture2DLodOffset(t, p, 0.0, o) + #else + #define FxaaTexOff(t, p, o, r) texture2DLod(t, p + (o * r), 0.0) + #endif + #if (FXAA_GATHER4_ALPHA == 1) + // use #extension GL_ARB_gpu_shader5 : enable + #define FxaaTexAlpha4(t, p) textureGather(t, p, 3) + #define FxaaTexOffAlpha4(t, p, o) textureGatherOffset(t, p, o, 3) + #define FxaaTexGreen4(t, p) textureGather(t, p, 1) + #define FxaaTexOffGreen4(t, p, o) textureGatherOffset(t, p, o, 1) + #endif +#endif +/*--------------------------------------------------------------------------*/ +#if (FXAA_GLSL_130 == 1) + // Requires "#version 130" or better + #define FxaaTexTop(t, p) textureLod(t, p, 0.0) + #define FxaaTexOff(t, p, o, r) textureLodOffset(t, p, 0.0, o) + #if (FXAA_GATHER4_ALPHA == 1) + // use #extension GL_ARB_gpu_shader5 : enable + #define FxaaTexAlpha4(t, p) textureGather(t, p, 3) + #define FxaaTexOffAlpha4(t, p, o) textureGatherOffset(t, p, o, 3) + #define FxaaTexGreen4(t, p) textureGather(t, p, 1) + #define FxaaTexOffGreen4(t, p, o) textureGatherOffset(t, p, o, 1) + #endif +#endif + + +/*============================================================================ + GREEN AS LUMA OPTION SUPPORT FUNCTION +============================================================================*/ +#if (FXAA_GREEN_AS_LUMA == 0) + FxaaFloat FxaaLuma(FxaaFloat4 rgba) { return rgba.w; } +#else + FxaaFloat FxaaLuma(FxaaFloat4 rgba) { return rgba.y; } +#endif + + + + +/*============================================================================ + + FXAA3 QUALITY - PC + +============================================================================*/ +#if (FXAA_PC == 1) +/*--------------------------------------------------------------------------*/ +FxaaFloat4 FxaaPixelShader( + // + // Use noperspective interpolation here (turn off perspective interpolation). + // {xy} = center of pixel + FxaaFloat2 pos, + // + // Used only for FXAA Console, and not used on the 360 version. + // Use noperspective interpolation here (turn off perspective interpolation). + // {xy__} = upper left of pixel + // {__zw} = lower right of pixel + FxaaFloat4 fxaaConsolePosPos, + // + // Input color texture. + // {rgb_} = color in linear or perceptual color space + // if (FXAA_GREEN_AS_LUMA == 0) + // {___a} = luma in perceptual color space (not linear) + FxaaTex tex, + // + // Only used on the optimized 360 version of FXAA Console. + // For everything but 360, just use the same input here as for "tex". + // For 360, same texture, just alias with a 2nd sampler. + // This sampler needs to have an exponent bias of -1. + FxaaTex fxaaConsole360TexExpBiasNegOne, + // + // Only used on the optimized 360 version of FXAA Console. + // For everything but 360, just use the same input here as for "tex". + // For 360, same texture, just alias with a 3nd sampler. + // This sampler needs to have an exponent bias of -2. + FxaaTex fxaaConsole360TexExpBiasNegTwo, + // + // Only used on FXAA Quality. + // This must be from a constant/uniform. + // {x_} = 1.0/screenWidthInPixels + // {_y} = 1.0/screenHeightInPixels + FxaaFloat2 fxaaQualityRcpFrame, + // + // Only used on FXAA Console. + // This must be from a constant/uniform. + // This effects sub-pixel AA quality and inversely sharpness. + // Where N ranges between, + // N = 0.50 (default) + // N = 0.33 (sharper) + // {x___} = -N/screenWidthInPixels + // {_y__} = -N/screenHeightInPixels + // {__z_} = N/screenWidthInPixels + // {___w} = N/screenHeightInPixels + FxaaFloat4 fxaaConsoleRcpFrameOpt, + // + // Only used on FXAA Console. + // Not used on 360, but used on PS3 and PC. + // This must be from a constant/uniform. + // {x___} = -2.0/screenWidthInPixels + // {_y__} = -2.0/screenHeightInPixels + // {__z_} = 2.0/screenWidthInPixels + // {___w} = 2.0/screenHeightInPixels + FxaaFloat4 fxaaConsoleRcpFrameOpt2, + // + // Only used on FXAA Console. + // Only used on 360 in place of fxaaConsoleRcpFrameOpt2. + // This must be from a constant/uniform. + // {x___} = 8.0/screenWidthInPixels + // {_y__} = 8.0/screenHeightInPixels + // {__z_} = -4.0/screenWidthInPixels + // {___w} = -4.0/screenHeightInPixels + FxaaFloat4 fxaaConsole360RcpFrameOpt2, + // + // Only used on FXAA Quality. + // This used to be the FXAA_QUALITY__SUBPIX define. + // It is here now to allow easier tuning. + // Choose the amount of sub-pixel aliasing removal. + // This can effect sharpness. + // 1.00 - upper limit (softer) + // 0.75 - default amount of filtering + // 0.50 - lower limit (sharper, less sub-pixel aliasing removal) + // 0.25 - almost off + // 0.00 - completely off + FxaaFloat fxaaQualitySubpix, + // + // Only used on FXAA Quality. + // This used to be the FXAA_QUALITY__EDGE_THRESHOLD define. + // It is here now to allow easier tuning. + // The minimum amount of local contrast required to apply algorithm. + // 0.333 - too little (faster) + // 0.250 - low quality + // 0.166 - default + // 0.125 - high quality + // 0.063 - overkill (slower) + FxaaFloat fxaaQualityEdgeThreshold, + // + // Only used on FXAA Quality. + // This used to be the FXAA_QUALITY__EDGE_THRESHOLD_MIN define. + // It is here now to allow easier tuning. + // Trims the algorithm from processing darks. + // 0.0833 - upper limit (default, the start of visible unfiltered edges) + // 0.0625 - high quality (faster) + // 0.0312 - visible limit (slower) + // Special notes when using FXAA_GREEN_AS_LUMA, + // Likely want to set this to zero. + // As colors that are mostly not-green + // will appear very dark in the green channel! + // Tune by looking at mostly non-green content, + // then start at zero and increase until aliasing is a problem. + FxaaFloat fxaaQualityEdgeThresholdMin, + // + // Only used on FXAA Console. + // This used to be the FXAA_CONSOLE__EDGE_SHARPNESS define. + // It is here now to allow easier tuning. + // This does not effect PS3, as this needs to be compiled in. + // Use FXAA_CONSOLE__PS3_EDGE_SHARPNESS for PS3. + // Due to the PS3 being ALU bound, + // there are only three safe values here: 2 and 4 and 8. + // These options use the shaders ability to a free *|/ by 2|4|8. + // For all other platforms can be a non-power of two. + // 8.0 is sharper (default!!!) + // 4.0 is softer + // 2.0 is really soft (good only for vector graphics inputs) + FxaaFloat fxaaConsoleEdgeSharpness, + // + // Only used on FXAA Console. + // This used to be the FXAA_CONSOLE__EDGE_THRESHOLD define. + // It is here now to allow easier tuning. + // This does not effect PS3, as this needs to be compiled in. + // Use FXAA_CONSOLE__PS3_EDGE_THRESHOLD for PS3. + // Due to the PS3 being ALU bound, + // there are only two safe values here: 1/4 and 1/8. + // These options use the shaders ability to a free *|/ by 2|4|8. + // The console setting has a different mapping than the quality setting. + // Other platforms can use other values. + // 0.125 leaves less aliasing, but is softer (default!!!) + // 0.25 leaves more aliasing, and is sharper + FxaaFloat fxaaConsoleEdgeThreshold, + // + // Only used on FXAA Console. + // This used to be the FXAA_CONSOLE__EDGE_THRESHOLD_MIN define. + // It is here now to allow easier tuning. + // Trims the algorithm from processing darks. + // The console setting has a different mapping than the quality setting. + // This only applies when FXAA_EARLY_EXIT is 1. + // This does not apply to PS3, + // PS3 was simplified to avoid more shader instructions. + // 0.06 - faster but more aliasing in darks + // 0.05 - default + // 0.04 - slower and less aliasing in darks + // Special notes when using FXAA_GREEN_AS_LUMA, + // Likely want to set this to zero. + // As colors that are mostly not-green + // will appear very dark in the green channel! + // Tune by looking at mostly non-green content, + // then start at zero and increase until aliasing is a problem. + FxaaFloat fxaaConsoleEdgeThresholdMin, + // + // Extra constants for 360 FXAA Console only. + // Use zeros or anything else for other platforms. + // These must be in physical constant registers and NOT immedates. + // Immedates will result in compiler un-optimizing. + // {xyzw} = float4(1.0, -1.0, 0.25, -0.25) + FxaaFloat4 fxaaConsole360ConstDir +) { +/*--------------------------------------------------------------------------*/ + FxaaFloat2 posM; + posM.x = pos.x; + posM.y = pos.y; + #if (FXAA_GATHER4_ALPHA == 1) + #if (FXAA_DISCARD == 0) + FxaaFloat4 rgbyM = FxaaTexTop(tex, posM); + #if (FXAA_GREEN_AS_LUMA == 0) + #define lumaM rgbyM.w + #else + #define lumaM rgbyM.y + #endif + #endif + #if (FXAA_GREEN_AS_LUMA == 0) + FxaaFloat4 luma4A = FxaaTexAlpha4(tex, posM); + FxaaFloat4 luma4B = FxaaTexOffAlpha4(tex, posM, FxaaInt2(-1, -1)); + #else + FxaaFloat4 luma4A = FxaaTexGreen4(tex, posM); + FxaaFloat4 luma4B = FxaaTexOffGreen4(tex, posM, FxaaInt2(-1, -1)); + #endif + #if (FXAA_DISCARD == 1) + #define lumaM luma4A.w + #endif + #define lumaE luma4A.z + #define lumaS luma4A.x + #define lumaSE luma4A.y + #define lumaNW luma4B.w + #define lumaN luma4B.z + #define lumaW luma4B.x + #else + FxaaFloat4 rgbyM = FxaaTexTop(tex, posM); + #if (FXAA_GREEN_AS_LUMA == 0) + #define lumaM rgbyM.w + #else + #define lumaM rgbyM.y + #endif + FxaaFloat lumaS = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2( 0, 1), fxaaQualityRcpFrame.xy)); + FxaaFloat lumaE = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2( 1, 0), fxaaQualityRcpFrame.xy)); + FxaaFloat lumaN = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2( 0,-1), fxaaQualityRcpFrame.xy)); + FxaaFloat lumaW = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2(-1, 0), fxaaQualityRcpFrame.xy)); + #endif +/*--------------------------------------------------------------------------*/ + FxaaFloat maxSM = max(lumaS, lumaM); + FxaaFloat minSM = min(lumaS, lumaM); + FxaaFloat maxESM = max(lumaE, maxSM); + FxaaFloat minESM = min(lumaE, minSM); + FxaaFloat maxWN = max(lumaN, lumaW); + FxaaFloat minWN = min(lumaN, lumaW); + FxaaFloat rangeMax = max(maxWN, maxESM); + FxaaFloat rangeMin = min(minWN, minESM); + FxaaFloat rangeMaxScaled = rangeMax * fxaaQualityEdgeThreshold; + FxaaFloat range = rangeMax - rangeMin; + FxaaFloat rangeMaxClamped = max(fxaaQualityEdgeThresholdMin, rangeMaxScaled); + FxaaBool earlyExit = range < rangeMaxClamped; +/*--------------------------------------------------------------------------*/ + if(earlyExit) + #if (FXAA_DISCARD == 1) + FxaaDiscard; + #else + return rgbyM; + #endif +/*--------------------------------------------------------------------------*/ + #if (FXAA_GATHER4_ALPHA == 0) + FxaaFloat lumaNW = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2(-1,-1), fxaaQualityRcpFrame.xy)); + FxaaFloat lumaSE = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2( 1, 1), fxaaQualityRcpFrame.xy)); + FxaaFloat lumaNE = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2( 1,-1), fxaaQualityRcpFrame.xy)); + FxaaFloat lumaSW = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2(-1, 1), fxaaQualityRcpFrame.xy)); + #else + FxaaFloat lumaNE = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2(1, -1), fxaaQualityRcpFrame.xy)); + FxaaFloat lumaSW = FxaaLuma(FxaaTexOff(tex, posM, FxaaInt2(-1, 1), fxaaQualityRcpFrame.xy)); + #endif +/*--------------------------------------------------------------------------*/ + FxaaFloat lumaNS = lumaN + lumaS; + FxaaFloat lumaWE = lumaW + lumaE; + FxaaFloat subpixRcpRange = 1.0/range; + FxaaFloat subpixNSWE = lumaNS + lumaWE; + FxaaFloat edgeHorz1 = (-2.0 * lumaM) + lumaNS; + FxaaFloat edgeVert1 = (-2.0 * lumaM) + lumaWE; +/*--------------------------------------------------------------------------*/ + FxaaFloat lumaNESE = lumaNE + lumaSE; + FxaaFloat lumaNWNE = lumaNW + lumaNE; + FxaaFloat edgeHorz2 = (-2.0 * lumaE) + lumaNESE; + FxaaFloat edgeVert2 = (-2.0 * lumaN) + lumaNWNE; +/*--------------------------------------------------------------------------*/ + FxaaFloat lumaNWSW = lumaNW + lumaSW; + FxaaFloat lumaSWSE = lumaSW + lumaSE; + FxaaFloat edgeHorz4 = (abs(edgeHorz1) * 2.0) + abs(edgeHorz2); + FxaaFloat edgeVert4 = (abs(edgeVert1) * 2.0) + abs(edgeVert2); + FxaaFloat edgeHorz3 = (-2.0 * lumaW) + lumaNWSW; + FxaaFloat edgeVert3 = (-2.0 * lumaS) + lumaSWSE; + FxaaFloat edgeHorz = abs(edgeHorz3) + edgeHorz4; + FxaaFloat edgeVert = abs(edgeVert3) + edgeVert4; +/*--------------------------------------------------------------------------*/ + FxaaFloat subpixNWSWNESE = lumaNWSW + lumaNESE; + FxaaFloat lengthSign = fxaaQualityRcpFrame.x; + FxaaBool horzSpan = edgeHorz >= edgeVert; + FxaaFloat subpixA = subpixNSWE * 2.0 + subpixNWSWNESE; +/*--------------------------------------------------------------------------*/ + if(!horzSpan) lumaN = lumaW; + if(!horzSpan) lumaS = lumaE; + if(horzSpan) lengthSign = fxaaQualityRcpFrame.y; + FxaaFloat subpixB = (subpixA * (1.0/12.0)) - lumaM; +/*--------------------------------------------------------------------------*/ + FxaaFloat gradientN = lumaN - lumaM; + FxaaFloat gradientS = lumaS - lumaM; + FxaaFloat lumaNN = lumaN + lumaM; + FxaaFloat lumaSS = lumaS + lumaM; + FxaaBool pairN = abs(gradientN) >= abs(gradientS); + FxaaFloat gradient = max(abs(gradientN), abs(gradientS)); + if(pairN) lengthSign = -lengthSign; + FxaaFloat subpixC = FxaaSat(abs(subpixB) * subpixRcpRange); +/*--------------------------------------------------------------------------*/ + FxaaFloat2 posB; + posB.x = posM.x; + posB.y = posM.y; + FxaaFloat2 offNP; + offNP.x = (!horzSpan) ? 0.0 : fxaaQualityRcpFrame.x; + offNP.y = ( horzSpan) ? 0.0 : fxaaQualityRcpFrame.y; + if(!horzSpan) posB.x += lengthSign * 0.5; + if( horzSpan) posB.y += lengthSign * 0.5; +/*--------------------------------------------------------------------------*/ + FxaaFloat2 posN; + posN.x = posB.x - offNP.x * FXAA_QUALITY__P0; + posN.y = posB.y - offNP.y * FXAA_QUALITY__P0; + FxaaFloat2 posP; + posP.x = posB.x + offNP.x * FXAA_QUALITY__P0; + posP.y = posB.y + offNP.y * FXAA_QUALITY__P0; + FxaaFloat subpixD = ((-2.0)*subpixC) + 3.0; + FxaaFloat lumaEndN = FxaaLuma(FxaaTexTop(tex, posN)); + FxaaFloat subpixE = subpixC * subpixC; + FxaaFloat lumaEndP = FxaaLuma(FxaaTexTop(tex, posP)); +/*--------------------------------------------------------------------------*/ + if(!pairN) lumaNN = lumaSS; + FxaaFloat gradientScaled = gradient * 1.0/4.0; + FxaaFloat lumaMM = lumaM - lumaNN * 0.5; + FxaaFloat subpixF = subpixD * subpixE; + FxaaBool lumaMLTZero = lumaMM < 0.0; +/*--------------------------------------------------------------------------*/ + lumaEndN -= lumaNN * 0.5; + lumaEndP -= lumaNN * 0.5; + FxaaBool doneN = abs(lumaEndN) >= gradientScaled; + FxaaBool doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P1; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P1; + FxaaBool doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P1; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P1; +/*--------------------------------------------------------------------------*/ + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P2; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P2; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P2; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P2; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 3) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P3; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P3; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P3; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P3; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 4) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P4; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P4; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P4; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P4; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 5) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P5; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P5; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P5; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P5; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 6) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P6; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P6; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P6; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P6; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 7) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P7; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P7; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P7; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P7; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 8) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P8; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P8; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P8; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P8; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 9) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P9; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P9; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P9; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P9; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 10) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P10; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P10; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P10; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P10; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 11) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P11; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P11; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P11; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P11; +/*--------------------------------------------------------------------------*/ + #if (FXAA_QUALITY__PS > 12) + if(doneNP) { + if(!doneN) lumaEndN = FxaaLuma(FxaaTexTop(tex, posN.xy)); + if(!doneP) lumaEndP = FxaaLuma(FxaaTexTop(tex, posP.xy)); + if(!doneN) lumaEndN = lumaEndN - lumaNN * 0.5; + if(!doneP) lumaEndP = lumaEndP - lumaNN * 0.5; + doneN = abs(lumaEndN) >= gradientScaled; + doneP = abs(lumaEndP) >= gradientScaled; + if(!doneN) posN.x -= offNP.x * FXAA_QUALITY__P12; + if(!doneN) posN.y -= offNP.y * FXAA_QUALITY__P12; + doneNP = (!doneN) || (!doneP); + if(!doneP) posP.x += offNP.x * FXAA_QUALITY__P12; + if(!doneP) posP.y += offNP.y * FXAA_QUALITY__P12; +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } + #endif +/*--------------------------------------------------------------------------*/ + } +/*--------------------------------------------------------------------------*/ + FxaaFloat dstN = posM.x - posN.x; + FxaaFloat dstP = posP.x - posM.x; + if(!horzSpan) dstN = posM.y - posN.y; + if(!horzSpan) dstP = posP.y - posM.y; +/*--------------------------------------------------------------------------*/ + FxaaBool goodSpanN = (lumaEndN < 0.0) != lumaMLTZero; + FxaaFloat spanLength = (dstP + dstN); + FxaaBool goodSpanP = (lumaEndP < 0.0) != lumaMLTZero; + FxaaFloat spanLengthRcp = 1.0/spanLength; +/*--------------------------------------------------------------------------*/ + FxaaBool directionN = dstN < dstP; + FxaaFloat dst = min(dstN, dstP); + FxaaBool goodSpan = directionN ? goodSpanN : goodSpanP; + FxaaFloat subpixG = subpixF * subpixF; + FxaaFloat pixelOffset = (dst * (-spanLengthRcp)) + 0.5; + FxaaFloat subpixH = subpixG * fxaaQualitySubpix; +/*--------------------------------------------------------------------------*/ + FxaaFloat pixelOffsetGood = goodSpan ? pixelOffset : 0.0; + FxaaFloat pixelOffsetSubpix = max(pixelOffsetGood, subpixH); + if(!horzSpan) posM.x += pixelOffsetSubpix * lengthSign; + if( horzSpan) posM.y += pixelOffsetSubpix * lengthSign; + #if (FXAA_DISCARD == 1) + return FxaaTexTop(tex, posM); + #else + return FxaaFloat4(FxaaTexTop(tex, posM).xyz, lumaM); + #endif +} +/*==========================================================================*/ +#endif + +vec4 mainImage(vec2 fragCoord) +{ + vec2 rcpFrame = 1./invResolution.xy; + vec2 uv2 = fragCoord.xy / invResolution.xy; + + float fxaaQualitySubpix = 0.75; // [0..1], default 0.75 + float fxaaQualityEdgeThreshold = 0.166; // [0.125..0.33], default 0.166 + float fxaaQualityEdgeThresholdMin = 0.02;//0.0625; // ? + vec4 dummy4 = vec4(0.0,0.0,0.0,0.0); + float dummy1 = 0.0; + + vec4 col = FxaaPixelShader(uv2, dummy4, + inputTexture, inputTexture, inputTexture, + rcpFrame, dummy4, dummy4, dummy4, + fxaaQualitySubpix, fxaaQualityEdgeThreshold, + fxaaQualityEdgeThresholdMin, + dummy1, dummy1, dummy1, dummy4); + + vec4 fragColor = vec4( col.xyz, 1. ); + + return fragColor; +} + +void main() +{ + ivec2 loc = ivec2(gl_GlobalInvocationID.x * 4, gl_GlobalInvocationID.y * 4); + for(int i = 0; i < 4; i++) + { + for(int j = 0; j < 4; j++) + { + ivec2 texelCoord = ivec2(loc.x + i, loc.y + j); + vec4 outColor = mainImage(texelCoord + vec2(0.5)); + imageStore(imgOutput, texelCoord, outColor); + } + } +} |